Beast of Bermuda Config Tool

This configuration Generator/Editor is compatible with Version 1.2.0084 of the server.

note:please hover over anything with a dashed line under it. It will have additional information about if you are confused about something!

Config Load Close ×

Load an existing config file with the button above, or paste your config below and click Submit

Use the buttons below to modify the config settings

Basic Configuration Top ↑

Map:

Gamemode: Life Cycle: grow and reproduce!
Combat:Fight to the Death!
Free Roam:Explore and chat!

Preferred Game Experience: PvPvE :Classic survival
PvP : server enables more PvP features
PvE : server disables intimidation and damage, PvP ONLY via Dueling (overridden on Titania to PvPvE)

Server Food Difficulty: This sets the server food drain rates.
Easy:Half food drain
Normal:Default drain rates
Hard:Double drain rates. hard to survive
Expert:Triple drain rates.for the Hardcore Dinos

Server Water Difficulty: This sets the server water drain rates.
Easy:Half water drain
Normal:Default drain rates
Hard:Double drain rates. hard to survive
Expert:Triple drain rates.for the Hardcore Dinos

Server Water Dirtiness Difficulty: This sets the server water Dirtiness rates.
Easy:Half water Dirtiness speed
Normal:Default Dirtiness speed rates
Hard:Double Dirtiness rates. hard to survive
Expert:Triple Dirtiness rates.for the Hardcore Dinos

Discord link Enabled:

Discord Join ID:this is the code after discord.gg/thiscodehere.
Will automatically remove the discord.gg/

Steam Group Required:

Steam Group ID:this is the "long" steam name that your users should be in

Use MOTD: Make Sure to have the file in place per the wiki entry!

Console Lock: Disabling this will place your server in open console mode and ignore command restriction settings

Reserved Admin Slots:
Disable Global Chat:
Disable Local Chat:

Enable Auto Resurrection: Enabling this will Auto Resurrect any dino that dies.
this is equivalent to the admin resurrection, where no growth is lost or penalties are incurred

Disable Random NamesWhen enabled, Disallows the use of the console command UseRandomName

Weather Configuration Top ↑

Enable Forest fires:This will effect storm and admin spawned fires.

Cap Storm Surge:This Keeps flooding from getting too high on the map. disable to allow Superfloods

Storm Surge Multiplier: This adjust how high the surge from flooding will occur.
setting to 0 will disable flooding
setting above 1 will multiply the height the flooding will progress

Spawn Tornados:This Enables or Disables tornado spawning during High Wind Storms

Stressful Storms:This Enables or Disables Stress caused by Severe Weather

Weather System Speed: This adjust how fast the weather system will run. a higher value will result in faster storms/Events.
A lower value will result in drawn out storms.

Weather System Intensity: This adjust how Severe the weather system will be. a higher value will result in Extreme storms/Events.
A lower value will result in calmer, more tame weather.

Weather System Period: This adjust how often the weather system will spawn storms. a lower value will result in storms occurring one right after another.
A higher value will result in long periods between events.

Weather Type- Rain: This adjust how often the weather system will spawn this weather event. a higher value will result in Rainstorms occurring more frequently, in relation to other storm types
A lower value will result in this weather type occurring less frequently.
setting this to 0 will disable this type of weather

Weather Type- Fog: This adjust how often the weather system will spawn this weather event. a higher value will result in Rainstorms occurring more frequently, in relation to other storm types
A lower value will result in this weather type occurring less frequently.
setting this to 0 will disable this type of weather

Weather Type- Overcast: This adjust how often the weather system will spawn this weather event. a higher value will result in Rainstorms occurring more frequently, in relation to other storm types
A lower value will result in this weather type occurring less frequently.
setting this to 0 will disable this type of weather

Weather Type- Dry Lightning: This adjust how often the weather system will spawn this weather event. a higher value will result in Rainstorms occurring more frequently, in relation to other storm types
A lower value will result in this weather type occurring less frequently.
setting this to 0 will disable this type of weather

World Configuration Top ↑

Day Length:

Carcass Spawn Rate: This multiplies the amount of total meat spawned over time on the map. max is 8x normal

Carcass Spawn Ratio: This adjust the size vs number of carcasses spawned.
A value closer to 0 will cause carcasses to spawn large, but rarely.
A value closer to 2 will cause carcasses to spawn small, but often.

Tunnel Despawn time: This determines the length of time a burrow network will remain after its last edit.
Please note, the tunnels are checked every 5 minutes, and there is a 5 minute delay when the timer hits 0 before it removes a network.

Disable Map Portals:This will remove any portals on the map.

Disable Restless Debuff:This will remove the debuff while in caves

Disable Random Eggs Spawns:This will remove the abandoned eggs that spawn around the map

Disable AI Spawns:This will disable ALL AI spawns. do note, this includes map editer placed spawners

Egg Spawn Chance:This is the chance that a carcass spawn will generate an abandoned egg
Setting to 0 will stop egg spawning
Setting to 1 will always spawn eggs instead of carcasses

Ocean Height Adjustment: This adjust the default level of the ocean.
setting it positive will increase the default height
setting it negative will lower the default height

Foliage Spawn Rate: This sets the Respawn rate of foliage

Global Dino Configuration Top ↑

Growth Rate:This sets how fast your players dinos will grow. the X number is the multiplier to the normal rate

Skin Max growth threshold: This allows setting the max growth before players can no longer edit their skin

Max Talents Allowed: This allows setting the max number of talents your creature can attain
Set to -1 to disable
creatures that exceed this value must remove talents until they are at this limit

Disable Resurrections:This Enables or Disables The Resurrection system
however, it will NOT remove the deities from the map

Disable Reincarnations:This Enables or Disables The Reincarnations system
however, it will NOT remove the deities from the map

Per Dino Configuration Top ↑

Use Hard Group Limits Enabling this will force groups to respect the creature caps.
Any young that hatch into a group at cap will automatically be ejected from the group.
Leaving this disabled allows groups to exceed the caps,at the cost that when the adults count reaches the limit,a stress debuff will be applied.

Creature	Soft Limit	% server population This sets a limit for the total number of a certain creature compared to the rest of the server. I.E.:50% on pteranodon means that a max of 50% of the server population can be Pteranodons. anyone that exceeds this will have their growth rate SEVERELY reduced.	Creature Growth Limit This sets a limit for the Max growth a creature can attain. Hard limited to 20	Pack Soft Cap Start This is the growth at which new pack members will start causing the overpacked debuff	Pack Soft Cap End This is the growth at which new pack members will reach max strength of the overpacked debuff
This Page Requires javascript to function properly. please enable and reload this page

Mixed Dino Configuration Top ↑

Mix-Herd Configuration

Use Mix Group Caps -When Checked, calculation of group caps (both soft and hard) use all members of a group, regardless of species
-When Unchecked, calculation of group caps (both soft and hard) use only members of the group that match the species of the player

Ignore Grouping Validation on Login Enabling this will allow creatures that are not in a valid group listed below to rejoin the group on login. if disabled, any creature that does not match a grouping below will be kicked from their group

Add Row	Remove Row	Set Faction Factions: C = Carnivore H = Herbivore A = Aquatic F = Flyer	Creatures To add a Creature to a list, click a Creature in the Add Creature dropdown on that row. To remove a Creature, click the Creature in the list to change the faction of the row, click on the C H A F buttons

Admin Rank Configuration Top ↑

Rank nameServer side names for setting permissions. Cannot contain spaces. You cannot share the same name for multiple levels.	Rank LevelThe Numeric level of the rank,in ascending order. Multiple ranks cannot be at the same value. Ranks with a higher value inherit the abilities of lower levels.	Remove Row	Add Row Below

Command Permissions Configuration Top ↑

Configuration Variables	Minimum RankThis is the minimum rank required to use the command. any rank above it will also have access. DO NOT set any of these to blank.
Announce Allows the usage of Announce
BanPlayer Allows the usage of the following commands: BanPlayer UnBanPlayer ListPunishedPlayers GetPunishedPlayers
CheckServerData Allows the usage of the following commands: ReqTunnelNodes ReqTunnelEntrances ReqTunnelMeshes ReqTunnelDecorativeMeshes ReqTunnelCollisionMeshes ReqTunnelDespawnTimes ReqTunnelActors
ClearBones allows the usage of ClearAllBones
ClearCarcasses Allows the usage of the following commands: DestroyAllCarcasses SpawnCarcass ListCarcasses
ControlServer Allows the usage of ServerConsoleCommand
ControlWeather Allows the usage of the following commands: FillAllFreshwater Lightning SetDayLength SetWeather ReqWeather ForceStorm Spawnfire ToggleWeatherData PauseWeather SetTimeOfDay MoveTornado KillTornado The following command needs additional perms: SpawnTornado
EditFoliage (Disabled on Titania!) Allows the usage of the Map Editor while in Spectator mode
GroupInvitesOnly Allows Admin Mixpacking
Groups Allows the usage of the following commands: DisbandAllGroups Admin Mixpacking
GrowEntity Allows the usage of the following commands: SetInBurrow SetModelAngles SetGrowthLevel AddGrowthTime FillAllStats SetStats SetScore
KickPlayer Allows the usage of the following commands: KickPlayer
ModifyEggsAndNesting Allows the usage of the following commands: SetGender DisplayHeredity MatePlayers SetFriendship DisplayFriendships DisplayEggs
ModifyServerData Allows the usage of the following commands: DeleteTunnelNetwork RemoveTunnelNetworkDirtPaddies PurgeOrphanData WipePlayerData RemoveAllCarcasses ResetAllFish ResetFish ForceServerSave ForceServerFlush ForceServerLoad
ModifyTalents Allows the usage of the following commands: SetTalents (to include the 'set x' commands) ListTalentModifiers ListTalentPoints
PossessEntity Allows the usage of PossessEntity
RespawnPlayer Allows the usage of the following commands: Respawn RestoreDeadEntity ResurrectPlayer
RestartMap Allows the usage of RestartLevel
ServerMutePlayer Allows the usage of the following commands: MutePlayer UnMutePlayer ListPunishedPlayers GetPunishedPlayers
SpawnEntity Allows the usage of the following commands: SpawnEntity SpawnEgg MoveTornado KillTornado GiveEgg DestroyEntity The following command needs additional perms: SpawnTornado
Teleport Allows the usage of the following commands: Teleport TeleportAt TeleportToP TeleportToMe TeleportPtoP
UseObserver Allows the usage of the following commands: SetViewHitboxes EnterSpectate LeaveSpectate TogglePlayerNameTags

Player Configuration Top ↑

Note:Leave Staff rank blank if you do not wish to assign a rank,chat tag blank to not assign a tag, and chat color to white to not assign a color

Steam ID This is the SteamID64 for the player. If highlighted in red, the id is invalid and needs to be checked	Staff Rank	Chat Tag This tag is placed right before the name in chat.use it to identify Staff/Vips/Special people! Leave blank to not set a tag	Name/Tag Color This will color the tag and name of a user. But will not effect their chat color. Click on the color to change it. Accepts RGB,HSV,HexColor. Leave White to not set a color. will automatically adjust the color/value to the closest accepted by the game	Hex code This is the Hexcode for the Name/Tag Color Allows copy/paste of colors Accepts HexColor. Leave #ffffff to disable will automatically adjust the color/value to the closest accepted by the game	Delete Line	Add Line	Steam Profile
							Predatoria
							Vipe

Advanced Configuration Top ↑

This section contains less often used configuration settings, or setting found under different headers. only change these setting if you understand the risk!

Ausosave frequency: Seconds

Rcon (Remote Console) settings:(Beta, not fully implemented yet)

Enable Rcon This will enable Rcon output from the server to 3rd party Rcon clients

Rcon Port Number: This is the port used to communicate remotely with the server via either the dedicated RCon tool or Scripts.

Rcon Ip Address: This is the Ip address you want the RCon to be connected via. default is 127.0.0.1(localhost)

Discord Webhooks settings:

Enable Discord Webhooks This will enable the Discord intergration. this is a WebHooks based system, you will need to use Channel Webhooks for this to work!

Chat Log: This is the webhook to the channel you want Chat to go to.

Chat Log Hook: This is the webhook link used. Accepts full webhook URLs and will convert on Entry.

Chat Log Icon: This is the webhook Icon you want to appear in Discord. This is an image URL

Chat Log Format: This is the Format used by the server to display messages posted in the webhooks

Combat Log: This is the webhook to the channel you want the Combat Log to go to.

Combat Log Hook: This is the webhook link used. Accepts full webhook URLs and will convert on Entry.

Combat Log Icon: This is the webhook Icon you want to appear in Discord. This is an image URL

Connection Log: This is the webhook to the channel you want Connects/Disconnects to go to.

Connection Log Hook: This is the webhook link used. Accepts full webhook URLs and will convert on Entry.

Connection Log Icon: This is the webhook Icon you want to appear in Discord. This is an image URL

Logout Format: This is the Format used by the server to display messages posted in the webhooks

Command Log: This is the webhook to the channel you want Admin Commands to go to.

Command Log Hook: This is the webhook link used. Accepts full webhook URLs and will convert on Entry.

Command Log Icon: This is the webhook Icon you want to appear in Discord. This is an image URL

Command Log Format: This is the Format used by the server to display messages posted in the webhooks

Grouping Log: This is the webhook to the channel you want Grouping actions to go to.

Grouping Log Hook: This is the webhook link used. Accepts full webhook URLs and will convert on Entry.

Grouping Log Icon: This is the webhook Icon you want to appear in Discord. This is an image URL

Event Log: This is the webhook to the channel you want World Events to go to.

Events Log Hook: This is the webhook link used. Accepts full webhook URLs and will convert on Entry.

Events Log Icon: This is the webhook Icon you want to appear in Discord. This is an image URL

Configuration Output Top ↑

Generate Game.ini will compile all the setting in the textarea below, and Download Game.ini will download a complete, ready to go file. When changing a setting, you must re-generate the ini by clicking a button above.

Click Generate Game.ini to output your config here,or click Download Game.ini to download a ready to insert file